Anker SOLIX E10 vs EcoFlow DELTA Pro Ultra: Which Is Better? (November 2026)
Choose Anker SOLIX E10 for a system built around its smart inlet box and solar storage; choose EcoFlow DELTA Pro Ultra for 7,200W output and 20 ms UPS transfer. Your home's circuit needs, charging plan and preferred setup should decide the fit.
On this page (6 sections)
Choose Anker SOLIX E10 for a backup system centered on its Smart Inlet Box; choose EcoFlow DELTA Pro Ultra for 7,200W output, dual voltage and expansion up to 90kWh. In this Anker SOLIX E10 vs EcoFlow DELTA Pro Ultra comparison, the right fit depends on your circuits, storage needs and how you plan to recharge.
E10 starts with 12kWh across 2 battery packs and expands to 30kWh. DELTA Pro Ultra starts with a 6,144Wh battery and can scale to 90kWh with 15 batteries.
These are expandable home backup systems, but their starting setups and control features differ. Compare the inverter output, battery capacity, transfer needs and installation plan against your home's actual loads.
Anker SOLIX E10 vs EcoFlow DELTA Pro Ultra: which fits your home?
Pick E10 if you value a Smart Inlet Box and a 12kWh starting setup; pick DELTA Pro Ultra if you need one inverter to provide 120V and 240V at up to 7,200W. Check your home's largest loads and the circuits you want to keep powered before deciding.
E10's output is 7.6kW continuous, with a 10kW turbo output for whole-home peaks. DELTA Pro Ultra's single inverter has 7,200W output and supports both 120V and 240V.
The numbers describe different output terms, so compare them with the requirements for your appliances and circuits. Ask an electrician to confirm how either system would connect to your home.
What stands out about the Anker SOLIX E10?
The E10 setup includes an E10 Power Module, 2 B6000 Battery Modules and a Smart Inlet Box. Its Smart Inlet Box can store solar and off-peak power for use during peak hours, and E10 supports 9kW of solar per unit.
Anker says the system is designed for outdoor use without shelter and is compatible with existing solar systems. E10 is compatible with most third-party portable and standby generators, according to Anker.
The 12kWh starting capacity assumes the included 2 battery packs. E10 can expand to 30kWh, so estimate the energy your essential loads need before choosing a capacity.
What stands out about EcoFlow DELTA Pro Ultra?
DELTA Pro Ultra combines an inverter and battery in its home backup system. One inverter supports 7,200W of AC output at 120V and 240V, while 3 inverters can provide a stated 21.6kW AC output.
It starts with one 6,144Wh battery and scales up to 90kWh with 15 batteries. EcoFlow says that amount can secure more than 30 days of essential power for a standard North American household, but your runtime will depend on what you run and how much energy those loads use.
The system also offers a 20 ms online UPS transfer time. Its battery needs a DELTA Pro Ultra inverter to charge, and EcoFlow says it isn't compatible with third-party inverters.
How much battery capacity should you plan for?
Choose capacity by adding up the energy your essential loads use, then allow for the backup period you want. Maximum battery capacity alone can't tell you how long a system will run your home.
Start with the circuits and appliances you need during an outage. Include their expected use over a typical day, then calculate the total for the number of hours or days you want to cover.
E10's 12kWh starting setup is larger than DELTA Pro Ultra's 6,144Wh starting battery. DELTA Pro Ultra can expand much farther, to 90kWh, while E10 expands to 30kWh.
That makes the starting point and the expansion ceiling different decisions. If your estimated energy need is above either system's starting capacity, check how many batteries you'd need and whether the resulting setup fits your space and budget.
Our EcoFlow DELTA Pro Ultra battery sizing guide walks through the capacity questions for that system. For broader system choices, see our best solar generator for whole house backup guide.
Which system suits your backup controls?
E10's Smart Inlet Box focuses on storing energy for later use, while DELTA Pro Ultra adds app controls for prioritizing circuits. Decide whether energy shifting, circuit selection or both matter most in your household.
Anker describes the Smart Inlet Box as a way to store solar and off-peak power, then use that energy during expensive peak hours. E10 is also compatible with existing solar systems, and the system supports 9kW of solar per unit.
EcoFlow says its app can prioritize specific home circuits to extend backup and analyze home power use. It also supports setting charging times, which may help you plan charging around your household schedule.
Controls depend on how the equipment connects to your home's circuits. See our guide to using a power station with your smart home for questions to consider when backup power meets connected devices.
How do the charging options compare?
Both systems offer multiple ways to recharge, but they differ in the details available here. Match the charging methods to the power sources you can use at home.
E10 supports solar input at 9kW per unit and works with existing solar systems. Its Smart Inlet Box can store solar and off-peak energy for later use, and Anker says E10 works with most third-party portable and standby generators.
DELTA Pro Ultra can charge from solar, wall outlets, EV charging piles or outdoor generators. EcoFlow says one 6,144Wh battery can fully recharge in 2 hours, though the actual setup and charging conditions matter.
For 240V AC charging through the C20 outlet, the maximum input is 3,000W and AC output is turned off during charging. With 120V input through the C20 outlet, EcoFlow describes a bypass mode; it says there is no bypass mode for 240V input.
If you're also weighing another expandable EcoFlow system, compare the Anker SOLIX F3800 Plus vs EcoFlow DELTA Pro 3 or read how to get 8,000W from EcoFlow DELTA Pro 3. For battery expansion options across the DELTA family, see our best expansion battery for EcoFlow DELTA guide.
What should you check before installation?
Check circuit compatibility, equipment placement, weight and connection requirements before buying either system. A high output figure doesn't confirm that a system can connect safely to every circuit in your home.
E10 offers wall or floor mounting. Anker recommends wall mounting in flood-prone areas and says to make sure the wall can support the weight; its power module weighs 60.6 lb, while each battery module weighs 130 lb.
DELTA Pro Ultra's inverter and battery arrive in individual packages. Its battery needs the matching inverter to charge, so plan for both pieces and confirm the setup requirements for your intended installation.
Ask a qualified electrician to review the planned connection, circuit loads and applicable local requirements. This is especially important if you want backup power to feed household circuits rather than individual appliances.
Which system should you choose for home backup?
Choose E10 for its included Smart Inlet Box, 12kWh starting capacity and 9kW solar support per unit; choose DELTA Pro Ultra for 120V and 240V output, 20 ms UPS transfer and expansion to 90kWh. Base your choice on the circuits you need, the energy they use and the installation plan you can support.
The E10's starting capacity and inlet box may fit a household that wants to store solar or off-peak energy. Its expansion limit is 30kWh, so check your load estimate before relying on the starting bundle.
DELTA Pro Ultra has a smaller single-battery starting capacity but a higher stated maximum expansion. Its dual-voltage output and UPS transfer feature may fit a household with those specific needs, provided the circuit design and inverter setup match.
Before you decide, size the batteries for the loads you need and confirm the connection with an electrician. For DELTA Pro Ultra, use our battery sizing guide; for a broader view, compare whole-house backup solar generators.
Frequently asked questions
Is Anker SOLIX E10 or EcoFlow DELTA Pro Ultra better for whole-home backup?
Either can support a home backup plan, but they suit different priorities.
E10 pairs a 7.6kW continuous output with a 10kW turbo output and a Smart Inlet Box. DELTA Pro Ultra provides 7,200W per inverter at 120V and 240V, with expansion up to 90kWh.
Which system can store more energy?
DELTA Pro Ultra can scale to 90kWh with 15 batteries, while E10 is stated to expand to 30kWh. Those figures describe maximum system capacity, not how long your home will run; runtime depends on the loads you connect and their energy use.
Can EcoFlow DELTA Pro Ultra work with a third-party inverter?
No. The DELTA Pro Ultra battery needs a DELTA Pro Ultra inverter to charge, and the system isn't compatible with third-party inverters.
E10, by contrast, is compatible with most third-party portable and standby generators, according to Anker.
Does DELTA Pro Ultra provide backup for sensitive devices?
DELTA Pro Ultra has an online UPS mode with a 20 ms transfer time for protection against power disturbances or grid failure. Check the needs of your specific devices and circuits, and confirm the system's installation and transfer setup with a qualified electrician.
Which system can help shift home energy use away from peak hours?
Both systems include features for managing energy use around peak rates. Anker says the Smart Inlet Box stores solar and off-peak power for later use, while EcoFlow says its app can prioritize circuits and analyze home power use.
