9 Best BLUETTI Power Stations for Refrigerators (November 2026)

The best BLUETTI refrigerator power stations include the Jackery Explorer 300 Portable Power Station for small cooling loads, the Jackery Explorer 1000 v2 Portable Power Station for portable fridge backup, and the Jackery HomePower 3600 Plus Power Station for whole-home backup plans.

On this page (4 sections)

1. Which BLUETTI power stations fit refrigerator backup?
2. Best BLUETTI power stations for refrigerator backup
3. How do you choose a BLUETTI station for a refrigerator?
4. Which BLUETTI refrigerator power station should you choose?

The best BLUETTI power station for refrigerator backup is FridgePower with Screen if you want automatic switching when grid power fails. It combines 2,016Wh capacity, 1,800W output and a 10ms UPS switchover; choose the Elite 100 V2 for a more portable general-purpose station.

A refrigerator needs enough output to start its compressor and enough stored energy to run through the outage. For the basics, see whether a portable power station can run a refrigerator, then compare these picks against your fridge's running and starting needs.

Our picks at a glance

1. 1
   Best for small cooling loads

   Jackery Explorer 300 Portable Power Station

   9.7/10 our score

   See it on Amazon
2. 2
   Best for portable fridge backup

   Jackery Explorer 1000 v2 Portable Power Station

   9.6/10 our score

   See it on Amazon
3. 3
   Best for whole-home backup plans

   Jackery HomePower 3600 Plus Power Station

   9.6/10 our score

   See it on Amazon

4. 4

   BLUETTI FridgePower Portable Power Station with Screen

   Best for automatic fridge backup
   Check it
5. 5

   BLUETTI Elite 100 V2 Portable Power Station

   Best for portable 1kWh backup
   Check it
6. 6

   Anker SOLIX S2000 Portable Power Station

   Best for longer stated fridge runtime
   Check it
7. 7

   BLUETTI Elite 30 V2 Portable Power Station

   Best for compact fridge loads
   Check it
8. 8

   BLUETTI FridgePower Power Station

   Best for slim fixed placement
   Check it
9. 9

   BROWEY 1600W

   Best for built-in solar charging
   Check it

Which BLUETTI power stations fit refrigerator backup?

BLUETTI FridgePower fits a fixed refrigerator backup setup, while the Elite 100 V2 and Elite 30 V2 serve portable use at different capacities. Our score weighs specs and features against refrigerator startup loads, outage runtime needs and portability.

Best BLUETTI power stations for refrigerator backup

FridgePower leads for automatic home backup, while the portable Elite models suit buyers who may use a station for other devices too. The picks below are ordered by their assigned scores.

1

Jackery Explorer 300 Portable Power Station: Best for small cooling loads

9.7/10Our score

• 292Wh capacity
• 300W rated output
• 600W peak surge
• 7.5 lb stated weight

Its light weight and compact capacity suit brief backup for a low-draw fridge or a car fridge. Check both running and starting watts before relying on it for a household refrigerator.

See it on Amazon

Pros

• Compact 292Wh capacity
• 600W peak surge
• 7.5 lb stated weight

Cons

• 300W rated output
• Limited capacity for long outages

The Jackery Explorer 300 is the lightest option here at a stated 7.5 lb, but its 292Wh capacity and 300W rated output limit its role. It may suit a compact car fridge or a brief backup for a low-draw refrigerator, provided its startup demand stays within the 600W peak.

Its small battery means it is not a strong choice for keeping a full-size refrigerator running through a long outage. Confirm both the compressor's startup watts and its average energy use before relying on this model.

Choose it for a small cooling load and easy carrying, not as the main backup for a kitchen refrigerator. The unit offers two AC outlets and can charge devices while it recharges.

2

Jackery Explorer 1000 v2 Portable Power Station: Best for portable fridge backup

9.6/10Our score

• 1,070Wh capacity
• 1,500W AC output
• 3,000W surge peak
• 23.8 lb

A larger battery and high surge rating offer more room for fridge startup and backup time. It is a Jackery option rather than a BLUETTI model, included as a comparison point.

See it on Amazon

Pros

• 1,070Wh battery capacity
• 3,000W surge peak
• Three pure sine wave AC ports

Cons

• Not a BLUETTI model
• Solar charging supports Jackery panels only

The Explorer 1000 v2 is a non-BLUETTI comparison for buyers who want a portable unit with more stored energy. Its 1,070Wh capacity, 1,500W AC output and 3,000W surge peak provide a broader operating range than a compact 300Wh-class station.

Jackery lists fridges among the appliances it can power. The 23.8 lb weight is still manageable for moving between a home and vehicle, and the three pure sine wave AC ports allow more than one device to connect.

Pick it when portability and capacity both matter, while remembering it only supports Jackery solar panels for solar charging. It is not a BLUETTI recommendation, but it helps show how a general-purpose station compares with FridgePower.

3

Jackery HomePower 3600 Plus Power Station: Best for whole-home backup plans

9.6/10Our score

• 3,584Wh capacity
• 3,600W output
• Expandable capacity
• Wheels and telescopic handle

This larger Jackery model offers substantial capacity for a broader home backup plan. Its 77.2 lb weight and dimensions call for a planned location rather than frequent carrying.

See it on Amazon

Pros

• 3,584Wh capacity
• 3,600W output
• Wheels and telescopic handle

Cons

• Not a BLUETTI model
• Heavier than portable picks

The HomePower 3600 Plus is also a comparison rather than a BLUETTI pick. Its 3,584Wh capacity and 3,600W output can support a broader home backup plan that includes a refrigerator and other loads.

At 77.2 lb, it is much heavier than the portable models in this roundup. Wheels and a telescopic handle help move it across a floor, but plan its storage location and route before an outage.

Consider it when refrigerator backup is one part of a larger home setup. For a dedicated refrigerator unit with slim placement and automatic switching, FridgePower is more focused.

4

BLUETTI FridgePower Portable Power Station with Screen: Best for automatic fridge backup

9.6/10Our score

• 2,016Wh capacity
• 1,800W continuous output
• 3,600W surge
• 10ms UPS switchover

FridgePower is designed for refrigerator backup, with a screen, 4W standby draw and a 10ms switchover. BLUETTI says it can pair with BlueCell 200 expansion batteries.

See it on Amazon

Pros

• Purpose-built refrigerator backup
• 10ms UPS switchover
• 75mm slim profile

Cons

• 19.7 kg stated weight
• Check installation space and fridge load

BLUETTI FridgePower with Screen is the most directly targeted option in this roundup. It has 2,016Wh capacity, 1,800W continuous output, a 3,600W surge rating and a 10ms switchover when grid power fails.

The 75mm slim profile is designed to fit beside or behind a refrigerator, and the unit can also be wall mounted. BLUETTI says its 4W standby draw helps it run longer than comparable capacity systems, and the screen gives you a local way to check its status.

The model supports four UPS modes, including Standard, PV Priority, Time of Use and Customized. BLUETTI says the unit can pair with BlueCell 200 expansion batteries for a total capacity of up to 8,064Wh.

Choose this model for a dedicated refrigerator backup setup with automatic switching and a slim body. Check the available space, outlet arrangement and refrigerator startup draw before installing it.

5

BLUETTI Elite 100 V2 Portable Power Station: Best for portable 1kWh backup

9.5/10Our score

• 1,024Wh capacity
• 1,800W rated output
• 2,700W Power Lifting
• 10ms UPS

The Elite 100 V2 combines a 1,024Wh battery with 1,800W output and a 10ms UPS. BLUETTI gives a 50W refrigerator runtime example, but your fridge's cycling and conditions will change actual runtime.

See it on Amazon

Pros

• 1,024Wh capacity
• 1,800W rated output
• 10ms UPS backup

Cons

• Runtime depends on refrigerator draw
• Keep upright during storage and transport

The Elite 100 V2 is the portable BLUETTI pick for buyers who want refrigerator backup and a station for other household or outdoor devices. Its 1,024Wh battery and 1,800W rated output give it far more capacity than the Elite 30 V2.

BLUETTI's example says it can run a 50W fridge for about 14.3 hours. That figure depends on a steady 50W draw, so it should not be treated as a promise for a household refrigerator that cycles its compressor.

The built-in 10ms UPS can help maintain connected equipment during a short interruption. For a similar essential-device use case, see oxygen concentrator backup with BLUETTI.

At 25 lb, it is portable enough to move, but it should stay upright in storage and transport.

Pick the Elite 100 V2 for a middle ground between capacity and portability. Estimate runtime from your fridge's daily energy use and leave reserve for conversion losses.

6

Anker SOLIX S2000 Portable Power Station: Best for longer stated fridge runtime

9.5/10Our score

• 2,010Wh capacity
• 1,500W continuous output
• 3,000W peak output
• 35-hour maker-stated fridge runtime

Anker's S2000 is a non-BLUETTI comparison with 2,010Wh capacity. Anker's 35-hour fridge figure is tied to specified lab conditions, so use your refrigerator's daily energy use for planning.

See it on Amazon

Pros

• 2,010Wh capacity
• 3,000W peak output
• Eight outlets

Cons

• Not a BLUETTI model
• No 12V DC port

The Anker SOLIX S2000 is included as a non-BLUETTI comparison with 2,010Wh capacity and 1,500W continuous output. Anker states up to 35 hours of refrigerator backup under specific lab conditions: a 700 L fridge at 77°F ambient, with the main compartment at 37°F and freezer at 0°F.

Those conditions matter. Your refrigerator size, room temperature, settings and door openings can change runtime, so use its Energy Guide daily consumption for a more useful estimate.

It has eight outlets but no 12V DC port. Consider it if you want to compare a similarly sized non-BLUETTI battery with the dedicated FridgePower design.

7

BLUETTI Elite 30 V2 Portable Power Station: Best for compact fridge loads

9.4/10Our score

• 288Wh capacity
• 600W continuous output
• 1,500W power lifting
• 10ms UPS

The Elite 30 V2 is a compact option for a small fridge whose running draw and startup surge fit its output limits. Its 288Wh capacity is better suited to shorter backup than a long household outage.

See it on Amazon

Pros

• 600W continuous output
• 1,500W power lifting
• 9.4 lb stated weight

Cons

• 288Wh capacity limits runtime
• Confirm fridge startup demand

The Elite 30 V2 is a compact BLUETTI station with 288Wh capacity, 600W continuous output and 1,500W power lifting. That output may handle the startup of a small refrigerator, but the refrigerator's running draw and surge must both fit the unit's limits.

Its 9.4 lb stated weight and 10ms UPS feature suit portable backup for small appliances and electronics. The limited battery capacity makes it a short-duration option, not an all-night solution for every refrigerator.

Choose it for a small fridge when easy transport matters more than long runtime. For freezer backup, compare larger battery choices in our portable power station picks for freezer backup.

8

BLUETTI FridgePower Power Station: Best for slim fixed placement

9.2/10Our score

• 2,016Wh capacity
• 1,800W output
• 4W idle draw
• 75mm slim profile

This FridgePower version has the same core capacity, output and slim profile details, with no screen in its product name. Check what comes in the package and its installation needs before choosing it.

See it on Amazon

Pros

• 2,016Wh capacity
• 4W idle draw
• 10ms UPS switchover

Cons

• 44 lb stated weight
• Package details describe two units

This FridgePower version shares the 2,016Wh capacity, 1,800W output, 4W idle draw and 75mm profile of the screen model. Its product name does not include the screen, so check the package contents and display setup that suit your planned installation.

It is built around the same refrigerator backup use, with a 10ms UPS switchover and options for wall mounting or freestanding placement. The stated weight is 44 lb, and package details describe two units, so confirm the configuration before choosing it.

Choose this version if its package and controls fit your setup. Leave room for airflow and access to cables, then confirm the refrigerator's startup watts.

9

BROWEY 1600W: Best for built-in solar charging

8.5/10Our score

• 1,024Wh capacity
• 1,600W output
• 3,200W peak
• Built-in 40W solar panel

BROWEY is another non-BLUETTI comparison, with a built-in 40W solar panel and a 1,024Wh battery. Its 1,600W output may suit compatible fridge loads, subject to the unit's startup demand.

See it on Amazon

Pros

• Built-in 40W solar panel
• 1,600W output
• 1,024Wh capacity

Cons

• Not a BLUETTI model
• Solar output varies with conditions

BROWEY 1600W is a non-BLUETTI comparison with 1,024Wh capacity, 1,600W output and a 3,200W peak rating. It also has built-in 40W solar panels, which can add charging input when sunlight and placement allow.

The product is stated to weigh 12 kg and includes multiple charging cables and adapters. Solar output depends on sunlight, angle, shade and other conditions, so treat it as a charging option rather than a guaranteed source during a storm.

Consider it if built-in solar charging is a priority, and verify that its output limits match your refrigerator. The larger BLUETTI picks here have specific refrigerator backup features that BROWEY does not list.

How do you choose a BLUETTI station for a refrigerator?

Start with the refrigerator's startup watts, then choose battery capacity for the outage length you want to cover. Output ratings answer whether a station can run the compressor, while watt-hours help estimate how long it can do so.

What startup output should a refrigerator power station handle?

A station's continuous rating should cover the fridge's running load, and its surge rating should cover compressor startup. For another device load example, see gaming PC power use.

A mismatch can cause an overload even when the battery has plenty of capacity.

Check the refrigerator manual or use a meter that captures startup draw. The Elite 30 V2 offers 600W continuous and 1,500W power lifting, while the Elite 100 V2 offers 1,800W rated output.

How much battery capacity do you need for outage runtime?

Use the refrigerator's daily energy consumption to estimate runtime, then leave a margin for inverter losses and changing conditions. A station's watt-hour rating is stored energy, not a direct promise of hours.

For a rough estimate, divide usable watt-hours by the fridge's average watts. Our guide to running a fridge continuously on a power station explains how to account for cycling and recharge plans.

Is a refrigerator UPS useful during an outage?

A UPS feature switches connected equipment to battery power when grid power drops. BLUETTI FridgePower and both Elite models list 10ms switching, which can reduce the interruption between grid and battery power.

A UPS feature does not increase battery capacity. Choose a larger battery or expansion option if you need longer backup, and make sure the refrigerator is connected according to the station's instructions.

Should you pick FridgePower or a portable BLUETTI station?

Choose FridgePower when the station will stay near a refrigerator and automatic backup matters. Its slim 75mm body and UPS modes are designed for a fixed home setup.

Choose the Elite 100 V2 if you want to move the station between home and trips, or the Elite 30 V2 for a smaller fridge load and shorter backup needs. For a broader brand comparison, see how BLUETTI and Anker power stations differ.

Which BLUETTI refrigerator power station should you choose?

Choose FridgePower with Screen for a dedicated refrigerator setup with 2,016Wh capacity and automatic switching. Pick the Elite 100 V2 when portability and a 1,024Wh battery matter more, or the Elite 30 V2 when the fridge is small and backup can be brief.

For a wider comparison across brands and sizes, see our best portable power station for a refrigerator guide and best BLUETTI portable power stations.

Our top 3 picks at a glance

1. 1
   Best for small cooling loads

   Jackery Explorer 300 Portable Power Station

   9.7/10 our score

   See it on Amazon
2. 2
   Best for portable fridge backup

   Jackery Explorer 1000 v2 Portable Power Station

   9.6/10 our score

   See it on Amazon
3. 3
   Best for whole-home backup plans

   Jackery HomePower 3600 Plus Power Station

   9.6/10 our score

   See it on Amazon

Frequently asked questions

Which BLUETTI power station is best for a refrigerator?

BLUETTI FridgePower is the closest match for a refrigerator that needs automatic outage backup. It has 2,016Wh capacity, 1,800W output and a 10ms UPS switchover.

For a portable general-use station, the Elite 100 V2 has 1,024Wh capacity and 1,800W output.

Match the choice to your fridge's startup watts and expected outage length.

Can a 1,000Wh BLUETTI run a refrigerator?

Yes, if the refrigerator's startup demand stays within the station's surge limit and its running demand stays within the continuous output limit. The Elite 100 V2 has 1,024Wh capacity and 1,800W rated output.

Capacity alone does not predict runtime.

Use the fridge's energy label or measured daily use to estimate backup time.

How long can BLUETTI FridgePower run a refrigerator?

Runtime depends on the refrigerator's energy use, temperature settings, room conditions and battery state. FridgePower has 2,016Wh capacity, and BLUETTI says expansion batteries can raise total capacity to 8,064Wh.

Use your refrigerator's daily energy figure to estimate runtime, then leave a margin for startup and conversion losses.

What size power station does a refrigerator need?

Choose a station whose continuous output exceeds the refrigerator's running watts and whose surge rating can handle compressor startup. Then select battery capacity based on the outage duration you want to cover.

A refrigerator's wattage can vary as its compressor cycles, so its energy label or a power meter gives a better runtime estimate than a single watt reading.